Socket Mobile Bluetooth Connection Kit - Manual (Page 26)

26 | CHAPTER 3: FEATURES
SCENARIO #3: Your Bluetooth Devices folder has no access points.
(a) When you tap Bluetooth LAN Access, the mobile computer will
automatically begin to search for new Bluetooth devices.
Note: You can also start the device search by tapping Find in the
Bluetooth Devices screen. See Scenario #2 on the previous page.
(b) After the search is complete, select the access point you wish to connect to.
Tap Select. If the access point is not listed, tap Refresh to search again.
(c) After you tap Select, a service discovery phase will begin.
(d) If the LAN requires a Passkey, a screen will appear, asking for the
Passkey. Enter the passkey, then tap ok.
(e) After a successful connection is made, the screen will report Connected.
(f) Now you are ready to access your LAN for Internet access, files, etc.
If you would like to
save the new access
point to your Bluetooth
Devices manager,
check Save selection
for future use.