Sony ZS-M7 - Manual (Page 18)

The CD Player•The MD Player
18 GB
Tips
• If the program play is
finished, the program
is saved. You can play
the same program
again by pressing
^.
• If you open the CD
tray, the program is
erased.
• If you take out the MD,
the program is erased.
• During play, total
programed time cannot
be displayed.
To cancel Program Play
Stop play first. Then, press SHUF/PGM until “PGM”
disappears from the display.
To check the order of tracks before play
Before starting the program play, press ENTER•YES.
“PGM Check” appears in the display. Every time you
press ENTER•YES, the track number appears in the
programed order.
To change the current program
Change before starting the program play.
To Do this
erase the last track in 1 Press CANCEL•NO.
the program The track programed last is erased.
2 Re-enter the track numbers by
turning the jog dial and pressing
ENTER•YES.
change the whole 1 Press p to erase the whole
program completely program.
2 Create a new program
following the programing
procedure.
Creating your own program (Program Play) (continued)