Sony ZS-M7 - Manual (Page 28)

Recording
28 GB
There are two ways of recording on a
recorded MD.
• To add to the previous recording.
The previous recording will remain.
• To record over the previous
recording. The previous recording
will be erased.
Adding recording (the previous
recording will remain)
Insert a recorded MD, and start
recording (pages 6, 26 and 27).
Recording will be made from the last
recorded position.
If there is not enough space on the
MD to record
When recording a whole CD, “CD>MD
OK?” appears in the display (page 7).
When recording from the radio or a
CD, press DISPLAY to check the
recording remaining time on the MD.
Recording over the previous
recording (the previous recording
will be erased)
To record over from the beginning of
the MD after erasing all tracks on the
MD
First, erase all tracks on an MD (page
32). You can use the MD the same as a
new one. Then, record on the MD as
usual.
To record over from a specific point
on the MD
1 Play the MD and press MD
^ to
pause play at the point you want to
start recording.
2 Press REC to make the player in
standby mode.
3 Play the sound source.
4 Press MD ^ to start recording.
Note
When recording over from a specific point
on the MD:
If the new recording is shorter than the
previous recording, a part of the previous
recording will remain after the recording.
As you repeat this type of recording,
many fragments of recording will remain
on the MD. We recommend that you erase
all tracks on the MD (page 32) if you no
longer need to keep the recording. Then,
start recording on the blank MD.
Recording on a recorded MD