Samsung BN68-01171B-03 - Manual (Page 45)

English - 45
4.5 System
This menu consists of 5 sub-menus:
Product Information, Signal Information, Software Upgrade,
Common Interface, and Reset.
− Product Information
You can view your product information. For service or repair,
please contact a Samsung approved dealer.
 Press the ENTER/OK button with Product Information
selected. The product information menu is displayed.
− Software Version / Firmware Version
− Signal Information
You can get information about the signal status.
 Press the ENTER/OK button with Signal Information
selected. The technical information for signal status is
displayed.
− Service / Service ID / Multiplex / Network / Bit error
level / Signal Strength
− Software Upgrade (Option)
To keep your product up-to-date with new digital television
features then software upgrades are periodically broadcast
as part of the normal television signal. It will automatically
detect these signals and display the software upgrade
banner. You are given the option to install the upgrade.
 Software Inforamtion
Press the ENTER/OK button, then the current software
version is shown. To display the software version
information, press the ENTER/OK button again.
 Manual Upgrade
Press the ENTER/OK button to search for new software
from the currently broadcasting channels.
 Standby Mode Upgrade : On / Off
Press the ENTER/OK button. To continue software
upgrade with master power on, Select On by pressing
the ▲ or ▼ button.
45 minutes after entering standby mode, a manual
upgrade is automatically conducted. Since the power
of the unit is turned on internally, the screen may be
on slightly for the PDP product. This phenomenon may
continue for more than 1 hour until the software upgrade
is completed.
Continued...

Digital Text
Time Zone
System 
Setup
Move Enter Return
Product Information 
Signal Information 
Software Upgrade 
Common Interface 
Reset 
System
Move Enter Return
Software Version: T_BDXPDEU00_0710
Firmware Version: T_STDEU7_102c
Product Information
Return
Service: ?
Service ID: 0000
Multiplex: ? (TSID 0000,ONID 0000)
Network: ? (ID 0000)
Bit error level: 10
Signal Strength: 0
Signal Information
Return
Software Information 
Manual Upgrade 
Standby Mode Upgrade : On 
Software Upgrade
Move Enter Return
BN68-01171A-03Eng_0319.indd 45 2007-03-19 ｿﾀﾈﾄ 3:40:37