Samsung BN68-01171B-03 - Manual (Page 7)

English - 7
1 POWER IN
Connect the supplied power cord.
2 Connecting external Audio Devices
Connect RCA audio signals from the TV to an
external source, such as Audio equipment.
3 EXT 1, EXT 2
Inputs or outputs for external devices, such as
VCR, DVD, video game device or video disc
players.
Input/Output Specification
Connector
Input Output
Video Audio(L/R) RGB Video + Audio(L/R)
EXT 1 ✔ ✔ ✔
Only TV or DTV
output is available.
EXT 2 ✔ ✔
Output you can
choose.
4 COMPONENT IN
Audio (AUDIO L/R) and video (Y/P
B
/P
R
) inputs
for Component.
5 DIGITAL AUDIO OUT (OPTICAL)
Connect to a Digital Audio Component.
6 SERVICE
− Connector for service.
− Connect the serial jack between the
electro-motion wall mount bracket and your
TV when you want to adjust the TV viewing
angle using your remote control.
7 PC IN / AUDIO
Connect to the video and audio output jack on
your PC.
8 COMMON INTERFACE Slot
Insert CI (Common Interface) card into the slot.
(refer to page 46)
− When not inserting “CI CARD” in some
channels, “Scramble Signal” is displayed on
the screen.
− The pairing information containing a
telephone number, CI CARD ID, Host ID,
and other information will be displayed in
about 2~3 minutes. If an error message
is displayed, please contact your service
provider.
− When the channel information configuration
has finished, the message “Updating
Completed” is displayed, indicating that the
channel list is now updated.
➢ Insert the CI-Card in the direction marked
on it.
9 HDMI IN 1, HDMI IN 2
− Connect to the HDMI jack of a device with
HDMI output. These inputs can also be used
as a DVI connection with separate analog
audio inputs. An optional HDMI/DVI cable
will be necessary to make this connection.
When using the optional HDMI/DVI adapter,
the DVI analog audio inputs on your TV
allow you to receive left and right audio from
your DVI device. (Not compatible with PC)
− When connecting this product via HDMI or
DVI to a Set Top Box, DVD Player or Games
Console etc, make sure that it has been
set to a compatible video output mode as
shown in the table below. Failure to observe
this may result in picture distortion, image
breakup or no picture.
− Do not attempt to connect the HDMI/DVI
connector to a PC or Laptop Graphics Card.
(This will result in a blank screen being
displayed)
DVI IN (HDMI 2) AUDIO L/R
DVI audio outputs for external devices.
0 ANT IN
75Ω Coaxial connector for Aerial/Cable
Network.
Supported modes for HDMI and Component
480i 480p 576i 576p 720p 1080i
HDMI/DVI 50Hz X X X O O O
HDMI/DVI 60Hz X O X X O O
Component O O O O O O
BN68-01171A-03Eng_0319.indd 7 2007-03-19 ｿﾀﾈﾄ 3:39:49