Audio, Setup, Speaker setting – Samsung AH68-02258S User Manual

Page 32: English, Distance, Test tone, Level

Advertising
background image

32

English

Setup

Distance

If the speakers cannot be placed at equal
distances from the listening position, you can
adjust the delay time of the audio signals from the
front, center, surround and subwoofer speakers.

You can set the Speaker Distance between
1ft(0.3m) and 30ft(9.0m).

Display

Audio

System

Network

Language

Security

General

Support

Settings

Distance

Front L

:

10ft (3.0m)

|

Front R

:

10ft (3.0m)

Center : 10ft

(3.0m)

Surround L :

10ft (3.0m)

Surround R :

10ft (3.0m)

Subwoofer :

10ft (3.0m)

Test Tone :

Off

Test Tone

Use the Test Tone feature to check the speaker
connections.

Press the ◄, ► buttons to select All.

A test tone will be sent to Front Left Center

Front Right Surround Right

Surround Left Subwoofer in order so you
can make sure the speakers are set up
correctly.

To stop the test tone, press the ◄, ► buttons to
select Off.

Display

Audio

System

Network

Language

Security

General

Support

Settings

Speaker Setting

<Change s Select r Return

Level

Distance

Test Tone

:

All |

Listen to the emitted sound from all speakers in sequence.

NOTE

When HDMI Audio is ON (audio is produced
through TV speakers), the Test Tone
function is not available.

Audio

Speaker Setting

Level

You can adjust the balance and level for each
speaker.

Adjusting Front/Center/Surround/Subwoofer
Speaker Level

• The volume level can be adjusted in steps from

+6dB to -6dB.

• The sound gets louder as you move closer to

+6dB and quieter as you get closer to -6dB.

<Change s Select r Return

Display

Audio

System

Network

Language

Security

General

Support

Settings

Speaker Setting

s Select r Return

Level

|

Distance

Test tone

:

Off

Display

Audio

System

Network

Language

Security

General

Support

Settings

Level

<Change s Select r Return

Front L

:

0 dB

|

Front R

:

0 dB

Center : 0

dB

Surround L :

0 dB

Surround R :

0 dB

Subwoofer :

0

dB

Test Tone

: Off

Set the speaker level to obtain the best possible surround sound.

Set the speaker level and distance to obtain the best possible surround sound.

Set the parameters of the distance from the listening position to the speakers.

HT-C5500_XAC_0129.indd 32

HT-C5500_XAC_0129.indd 32

2010-01-29 3:24:42

2010-01-29 3:24:42

Advertising
This manual is related to the following products: