Sony VAIO VGN-SZ600 - Manual (Page 87)

87 n N
Using Peripheral Devices
Connecting a Projector
You can connect a projector (for example, the Sony LCD projector) either directly to your computer or via the optional docking
station.
To connect a projector
1 Connect the power cord (1) of your projector into an AC outlet.
2 Plug an RGB signal cable (2) (not supplied) into the monitor (VGA) port (3) a on the computer or on the docking station.
3 Plug an audio cable (4) (not supplied) into the headphones jack (5) i on the computer.
4 Plug the RGB signal cable and the audio cable into the jack and port on the projector (6).