Sony MD Walkman MZ-G755 User Manual

Page 16

Advertising
background image

16

About the DSP TYPE-R for ATRAC

“TYPE-R” is a high-level Sony specification used in the Digital Signal
Processor (DSP), which is heart of the MiniDisc sound. This technology gives
the MiniDisc recorder twice the signal processing capability as previous
MiniDisc Walkman models, producing a sound quality close to that of
MiniDisc decks. This unit supports the “TYPE-R” function only during
recording or playback in normal stereo mode. It does not support this function
in MDLP mode.

Notes

If the power supply is disrupted (i.e. the battery is removed or becomes

exhausted or the AC power adaptor is disconnected) during a recording or
editing operation, or while “TOC Edit” appears in the display, then it will not
be possible to open the lid until power is restored.

You can make a digital recording only from an optical type output.
When recording from a portable CD player, set the CD player to pause, and

then do the recording procedure on the recorder.

Note the following when recording from a portable CD player:

—Some portable CD players may not be capable of digital out unless

powered by the AC power.

—Connect the AC power adaptor to the portable CD player and use it on AC

power as the power source.

—Disable any anti-skip function (such as ESP*) on the portable CD player.

∗ Electronic Shock Protection

z

LINE IN (OPTICAL) jack is for both digital and analog input. The recorder

automatically recognizes the type of line cable and switches to digital or
analog input.

The level of the recorded sound is adjusted automatically.
You can monitor the sound during recording. Connect the supplied

headphones/earphones with remote control to i and adjust the volume by
pressing VOL +/–. This does not affect the recording level.

Advertising