Sony MD Walkman MZ-G755 - Manual (Page 23)

23
Note
Track marks may be copied incorrectly:
• when you record from some CD players or multi disc players using digital
(optical) input.
• when the source is in shuffle or program play mode while recording using
digital (optical) input. In this case, play the source in normal play mode.
• when programs with audio that is digitally broadcast (e.g., digital TV) are
recorded through the digital (optical) input.
Recorded
track numbers Marked (copied)
automatically
• at the same positions as
the source (when the
sound source is a CD or
an MD).
• after more than 2 seconds
of blank or low-level
segment (with a sound
source other than CD or
MD).
• when the recorder is
paused during synchro-
recording (the recorder
pauses automatically
when it encounters a
section with no audio
signal for 3 seconds or
more).
You can erase unnecessary
marks after recording.
(“Erasing a track mark”,
page 52).
Marked
automatically
• after more than 2
seconds of blank or
low-level segment.
• when the recorder is
paused while
recording.
You can erase
unnecessary marks
after recording
(“Erasing a track
mark”, page 52).
Recorded
sound level Same as the source.
Can also be adjusted
manually (Digital REC
level control) (“Adjusting
the recording level
manually
(Manual recording)”,
page 32). Adjusted
automatically. Can
also be adjusted
manually (“Adjusting
the recording level
manually
(Manual recording)”,
page 32).
Difference Digital (optical) input Analog (line) input