Samsung SVD-4600 - Manual (Page 8)

COLOR CCD CAMERA User Guide 14 COLOR CCD CAMERA User Guide 15
1. Press the Function Setup switch.
• Main setup menu is displayed on the monitor screen.
2. Select a desired function using the Function Setup switch.
• Place the cursor over a desired item.
Operating Your Camera
3. Set up a selected item by using the Function Setup switch.
4. To finish the setting, select ‘EXIT’ and press the Function Setup switch.
Using this function, you can control screen brightness.
1. When the SETUP menu screen is displayed, select 'LENS' by using the Function
Setup switch so that the arrow indicates 'LENS'.
LENS
• An item with the icon also has sub menus. To select a sub menu, select an item
with the icon and press the Function Setup switch.
• An item with the - - - icon is unavailable due to function settings.
Notes
Select the function by moving
up or down direction of
function setup switch. Change the status by
moving right or left
direction of function setup
switch.
SHUTTER : Because of using a DC lens, the shutter speed is fixed.
(NTSC mode l: 1/60 sec, PAL model : 1/50 sec)
When flickering occurs on the screen, select the A.FLK mode using the
Function Setup switch.
- A.FLK : Select this when you experience picture flicker, which can happen when there is a
clash with the frequency of the installed lighting.
• To produce better results with A.FLK, do not use it in conjunction with the WDR
mode of the BACKLIGHT menu.
• When the SHUTTER is set to A.FLK mode, SENS-UP will be disabled.
Notes
DC : Select Auto Iris Lens
• When DC is selected, you can control screen
brightness. The range of brightness control is
between 1 and 70. Adjust the brightness
appropriately for optimal screen brightness.
1. When the SETUP menu screen is displayed, select
'EXPOSURE' by using the Function Setup switch so that
the arrow indicates 'EXPOSURE'.
2. Select a desired mode using the Function Setup switch.
EXPOSURE
MAIN SETUP
1.LENS DC
2.EXPOSURE
3.WHITE BAL ATW
4.BACKLIGHT OFF
5.SSNR ON
6.DAY/NIGHT AUTO
7.IMAGE ADJ
8.SPECIAL
9.EXIT
MAIN SETUP
1.LENS DC
2.EXPOSURE
MAIN SETUP
1.LENS DC
2.EXPOSURE
3.WHITE BAL ATW