Samsung SIR-T151 - Manual (Page 29)

4.5
CHAPTER FOUR
Special Features
4 4
Choosing a Digital Sound Format (Dolby or PCM)
Both analog and digital sounds are available from the rear-panel connectors of the Set-Top
Box. The digital sound output is an optical or coaxial connector labeled “Dolby Digital
Output”
After connecting the optical or coaxial digital-audio component, you must specify the trans-
mission format (Dolby or PCM, as appropriate to your particular equipment).
1 Press the MENU button on the remote control.
2 Use the Menu Up/Down buttons to
highlight the Setup icon and
press ENTER.
3 Use the Menu Up/Down button to
highlight the Sound Output icon and
press ENTER.
4 Use the Menu Up/Down buttons to choose the appropriate format
(Dolby or PCM).
5
Press EXIT.