SV Sound SX-VT - Manual (Page 7)

SX-ST / SX-SV User Manual page 7
2. INSTALLATION
2.1 Safety Instructions
•
Read all the safety and operation instructions before operating the SX-ST / SX-VT console and its
power supply.
•
Keep the instructions for further reference.
•
Follow all warnings, notes and instructions in this operation manual.
•
Do not use the SX-ST / SX-VT console and its power supply near water, avoid moisture.
•
Keep the SX-ST / SX-VT console and its power supply away from heat sources such as radiators or
other devices that produce heat.
•
Connect the SX-ST / SX-VT console only to the original power supply included with the console or to
one with same characteristics as described in these instructions.
•
Route power supply cords so that they are not likely to be walked on or pinched by items placed on or
against them, paying particular attention to cords at plugs, inlets and the point where they exit the
console. Keep power cords away from audio cords.
•
Do not drop objects or spill liquids onto the SX-ST / SX-VT console and its power supply.
•
The SX-ST / SX-VT console and its power supply should only be serviced by qualified service
personnel. Please contact factory or your nearest
SONOSAX authorized reseller.
•
Do not defeat the grounding or polarization of the SX-ST / SX-VT console or its power supply.
•
Line voltage selectors should only be set and equipped with a proper plug for alternate voltage by a
qualified service technician.
•
To reduce the risk of fire or electric shock, do not expose this appliance to rain or moisture.
•
Internal settings must be executed by an authorized SONOSAX distributor or reseller. There is no user
serviceable parts inside the mixer. Damage due to manipulations inside the unit cancels the SONOSAX
warranty immediately..