Scotts S2546 - Manual (Page 17)

Operating Machine - Page 14
OPERATING MACHINE
3. Pull PTO lever (A) back to DISENGAGE.
4. Start engine and move throttle lever (B) to FAST (
r
)
speed position.
5. Raise up off of seat. DO NOT get off tractor.
6. Engine MUST remain running. If engine does stop,
there is a problem with your safety interlock circuit. (See
your Authorized Service Center.)
Test 6
1. Lock the park brake (A).
2. Put transmission shift lever (B) in N (Neutral).
3. Try to push machine manually.
4. Park brake MUST prevent machine from moving. If
machine moves, parking brake needs to be adjusted. (See
your Authorized Service Center.)
Test 7
Test Reverse Implement Option:
1. Start engine.
2. Push PTO lever (A) forward to ENGAGE.
3. Look behind the vehicle to be sure there are no
bystanders.
4. Begin REVERSE travel by moving the transmission shift
lever to R (REVERSE) position.
Mower and engine should stop operation. If mower or
engine continues to operate as tractor begins travel in
REVERSE, do not continue to operate mower. (See your
Authorized Service Center for service.)
Avoid Damage to Plastic and Painted
Surfaces
• DO NOT wipe plastic parts unless rinsed first. (See
Correct Cleaning Care in Service-Miscellaneous section.)
• Insect repellent spray may damage plastic and painted
surfaces. Do not spray insect repellent near machine.
• Be careful not to spill fuel on machine. Fuel may
damage surface. Wipe up spilled fuel immediately.
A
B
B
A
C
c
CAUTION: Avoid injury. Before moving
rearward, make sure area is clear of
bystanders, especially children.
A