Sierra Monitor Corporation ZSE30 - Manual (Page 14)

Install using the special bracket (Article No.ZS-27-B) or the panel mount adapter (Article No.ZS-27-C)
available as options.
Caution : Tighten the pipe port at a clamping torque of 7 to 9N
⋅m.
Fasten the bracket mounting screws at a clamping torque of 0.5 to 0.7N
⋅m.
Mounting by Bracket
Mount the bracket on the main unit using the two
mounting screws M3
× 5L and install on the facility
using hexagon socket head cap screws.
Mounting procedure with the panel mount adapter
1. Mount the panel mount adapter (1) to the switch display
side.
Mount the panel mount adapter so that the adapter hook
engage with the groove of the switch.
2. Insert the switch from the front of the panel
for the switch mount hole.
3. Mount the panel mount adapter (2) to the switch
from the back of the panel.
Press the panel mount adapter (2) with a driver
to the panel for secure mount.
Panel mount adapter (2) can be mounted even
when rotated 90°.
4. Play can be reduced by using attached tapping screw.
-13-
PS##-OMF0010-C
Installation