Samsung DA68-01453B - Manual (Page 20)

19
INSTALLATION OF THE REFRIGERATOR
• Check the dimensions of your entrance door to determine whether the refrigerator can
pass through it.
• Moving refrigerator through door if depth or width of refrigerator is bigger than door’s,
removes refrigerator doors.
Checking the Dimensions of your Entrance Door
NOTE
• Select a location with easy access to the water supply.
• Select a location with enough space for the refrigerator.
• Select a location without direct exposure to sunlight.
• Before disassembling the freezer door, the water supply line needs to be disconnected.
(If not, the water supply line can be damaged.)
• See “Separating the water supply line from the refrigerator” on the next page.
Selecting the Location for the Refrigerator
Allow sufficient space to install the refrigerator on a flat surface.
• If your refrigerator is not level, the internal cooling system may not work correctly.
CAUTION
• Be careful when you openÄthe door in full
swing.ÄIt might come in contact with its adja-
cent units.
CAUTION
INST
ALLA
TION INSTR
UCTIONS
Loading Plan
When you install the refrigerator, it is recommended that the
clearance be maintained as much as specified below.
To get the sufficient Energy efficiency, keep the clearance of the
back side more than 10Cm and follow the Loading Plan.
To get more space remove the upper box in the freezer and all
boxes in the fresh food compartment since it does not effect
satisfactory thermal and mechanical characteristics.
NOTE
501mm 428mm
940mm
600mm
125 o
125 o
940mm
600mm
For fitting proud of adjacent units
at least 26mm at least 26mm
Epel pjt IB-01453B-EN (0.1) 4/15/05 1:17 PM Page 19