Adjust the clearance between the doors, Inst alla tion instr uctions, Making small adjustments between doors – Samsung DA68-01453B User Manual
Page 28
27
INST
ALLA
TION INSTR
UCTIONS
ADJUST THE CLEARANCE BETWEEN THE DOORS
Making small adjustments between doors.
If the door of freezer is higher or lower than that of the refrigerator.
3) After adjusting the doors, turn the nut (
①
) clockwise( ) until the lower end of the bolt, then tighten the
bolt again with the wrench (
➂
) to fix the nut(
①
).
If you do not fix the nut (
①
)firmly, the bolt (
➁
) may be released.
2) Please adjust the height difference between the doors turning the bolt (
➁
) clockwise( ) or counter
clockwise ( ).
When you turn clockwise (
), the door goes up.
➂
WRENCH
➀
NUT
➁
BOLT
➀
NUT
➁
BOLT
➂
WRENCH
➂
WRENCH
➁
BOLT
Please open the doors and adjust the doors as follows:
1) Release the nut (
①
) on the lower hinge until the upper end of the bolt (
➁
).
When you release the nut(
①
), use enclosed hex wrench (
➂
) to turn the bolt(
➁
) a little
counter clockwise. Loosen the nut(
①
) with your finger.
NOTE
NOTE
NOTE
➀
NUT
Adjustment part
Epel pjt IB-01453B-EN (0.1) 4/15/05 1:17 PM Page 27