Siemens SL370 - Manual (Page 49)

48
Handset settings
Gigaset SL375 / AUS / A31008-M1903-C401-1-7619 / registr_sett.fm / 14.8.07
Ve
rs
ion 4,
16
.09.
2005
The room monitor will use all the handsets
that are in walky-talky mode.
Switch the room monitor off by pressing
the display key §OFF§ on the handset that
was used to activate the room monitor.
The handset reverts to normal walky-talky
mode.
Handset settings
Your handset is preconfigured, but you
can change these settings to suit your
individual requirements.
Shortcuts for functions and
numbers
You can assign the left display key and
each of the digit keys Q and 2 to
O a number or a function. The right dis-
play key has a function pre-selected by
default. You can change the assigned
function.
The number is then dialled or the function
started by simply pressing a key.
Assigning a digit key/left display key
Precondition: The digit key or the left dis-
play key has not yet been assigned a
number or a function.
¤
Press the display key } or press
and hold the digit key.
The list of possible key assignments is
opened. The following can be selected:
Quick Dial / Call-by-Call
Assign key to a number from the direc-
tory or call-by-call list.
The directory or call-by-call list is
opened.
¤
Select an entry and press §OK§ .
If you delete or edit an entry in the
directory or call-by-call list, this has no
effect on the assignment to the digit/
display key.
Room Monitor
Assign key to the menu for setting
and activating the room monitor (see
page 46).
Alarm Clock
Assign key to the menu for setting
and activating the alarm clock (see
page 53).
Calendar
Open calendar/enter new appoint-
ment.
Bluetooth
Assign the Bluetooth menu to a key.
More Features...
More features are available:
INT
Internal calls (see page 44).
SMS
Assign the menu for SMS functions
to a key (see page 28).
SMS Service
Assign key with the menu for order-
ing info services (page 33).
SMS Notific.
Assign key with the menu for acti-
vating SMS notification (page 31).
If the left display key has been assigned a
shortcut, the selected function or name of
the phone number in the directory or call-
by-call list is displayed (abbreviated if nec-
essary) in the bottom display line via the
display key.
Starting the function, dialling the
number
If the handset is in idle status, press and
hold the digit key or press the display key
briefly.
Depending on the key assignment:
u Numbers are dialled directly.
u The function menu is opened.