Starting the terminal – Symbol Technologies PPT 8800 User Manual
Page 10
8
P P T 8 8 0 0
Starting the Terminal
Press the
button to turn on the terminal. If the terminal does
not power on, perform a hard reset. See
As the terminal initializes its unique Flash File system, the Symbol
splash screen displays for about a minute followed by the
calibration screen. Note that these screens also appear every time
you perform a hard reset.
Calibrating the Screen
To align your terminal so the cursor on the touch screen aligns with
the tip of your stylus:
1. If necessary, adjust the backlight on the terminal so the
screen is readable (see
Adjusting the Backlight on page 9
).
2. Remove the stylus from the stylus silo.
3. Tap the center of each target that appears on the Align
screen with the tip of the stylus.
4. Follow the directions on the screen which explains how to
use the stylus and pop-up menus, and allows you to set your
time zone.