Symbol Technologies PPT 8800 - Manual (Page 7)

5
Q u i c k R e f e r e n c e
Getting Started
Before using the PPT 8800, perform the basic setup procedures:
• Install and charge the main battery and backup battery
• Start the terminal
• Initiate the network connection.
Installing the Battery
Note: Also use the following procedures for installing the op-
tional larger capacity lithium-ion battery and battery
cover.
1. Turn the locking screw counterclockwise until the battery
cover releases from the terminal.
2. Lift the battery cover away from the terminal.
3. Insert the battery in the battery compartment with the battery
tether positioned as shown, ensuring that the battery snaps
into place.
Tether