Sanyo FXCD-550 - Manual (Page 11)

-10-
ATP (AUTO TRAVEL PRESET) OPERATION ................ 4
The Auto Travel Preset function searches for and memorizes the 6 strongest stations in one of the two
bands (FM, AM) in the order of signal strength.
This feature is useful when you are driving in an unfamiliar location and want to memorize local stations
without changing the standard preset stations.
A total of 12 stations (6 FM and 6 AM) can be programmed.
• To set the stations............................... Select the desired band.
Press and hold the ATP button for more than 2 seconds.
“ATP” appears in the display.
When the stations have been memorized, scanning stops and the
strongest station is selected.
• Quick Tuning of ATP Stations ................. Select the desired band.
Press the ATP button if the “ATP” indicator does not appear in
the display.
While ATP is illuminated, press the ATP button and the unit
seeks ATP1-6. If there is no preset ATP, - 0 - appears in the
display.
• To scan programmed stations............. See “PRESET-SCAN-BUTTON OPERATION”.
To cancel the ATP, press the BND button . When ATP is canceled, the ATP indicator disappears and ATP
mode is canceled.
PRESET-SCAN-BUTTON OPERATION ........................ 1, 4
This function scans each of the preset stations stored in the selected band (both manual preset and
auto travel presets).
Select the desired band or ATP mode.
Press the BND button for FMI, FMII or AM. Press the ATP button to select the ATP mode.
Press the BND button for more than 2 seconds. The system will select and receive each preset station
for five-second.
To stop scanning and retain the station currently selected, press the BND button again during this
five-second period.
1
2
1
2
3
1
2
3
• If no station can be received, “- 0 -” appears in the display.
• If fewer than 6 stations can be received, the system will memorize as many stations as
possible, then select the strongest one.
• If ATP mode is selected in FMII band, FMI ATP mode is selected.
Notes