Bassxpander (basx) - 1/2, Radio selection button (bnd), Tape selection button (tape) – Sanyo FXCD-550 User Manual

Page 9: Cd selection button (cd), Clock button (disp)

Advertising
background image

-8-

BASSXPANDER (BASX) - 1/2

..................................... 4

BASSXPANDER is a dual-mode sound equalization feature. Press button

to select the BASSXPANDER

mode as follows;

BASSXPANDER offers two preset mode: b-1 enhances the low and high frequencies, while b-2 enhances
the low frequencies and reduces the high frequencies.

RADIO SELECTION BUTTON (BND)

........................... 5

Press the BND button to switch from CD player, or tape mode to radio.
Each time the button is pressed, the function changes as shown below.

TAPE SELECTION BUTTON (TAPE)

............................ 6

Press the TAPE button

with a tape slot to switch from radio or CD player mode to tape mode.

CD SELECTION BUTTON (CD)

................................... 7

Press the CD button

with a CD slot to switch from radio or tape mode to CD player mode.

CLOCK BUTTON (DISP)

............................................ 8

Press the DISP button to switch between the clock and audio display. When an audio function is
performed while the time display is selected, the audio display will appear for 5 seconds, then the display
will return to the time mode.

TO CANCEL THE BEEP TONES

................................. 1, 2

To cancel the beep tones, press the SEL button and ON/OFF button simultaneously until “b : OFF”

is displayed.

To turn on the beep tones again, perform the same procedure. The beep tones are set and “b : On” is

displayed.

b-1

b-2

OFF

1

2

FMI

FMII

AM

Advertising