Sharp Aquos LC 37HV6U - Manual (Page 40)

39
Basic adjustment settings
No signal off
When set to “Enable”, the power will automatically shut
down if no signal inputs for 15 minutes.
Press a/b to select “No Signal Off”, and
then press SET/ENTER.
Press c/d to select “Enable”, and then
press SET/ENTER.
3
4
• Five minutes before the power shuts down,
remaining time displays every minute.
NOTE
• “Disable” is factory preset value.
• When a TV program finishes, and the AVC System receives
signal input, this function may not operate.
Press c/d to select “Power Control”.
Press MENU and the TV MENU screen
displays.
No operation off
When set to “Enable”, the power will automatically shut
down if there is no operation for 3 hours.
Press a/b to select “No Operation Off”, and
then press SET/ENTER.
Press c/d to select “Enable”, and then
press SET/ENTER.
• Five minutes before the power shuts down,
remaining time displays every minute.
NOTE
• “Disable” is factory preset value.
Press c/d to select “Power Control”.
Press MENU and the TV MENU screen
displays.
2
1
TV MENU [Power Control ... No Signal Off]
Power Control Setup
No Signal Off
No Operation Off [Disable]
[Disable]
Disable Enable
3
4
2
1
TV MENU [Power Control ... No Operation Off]
Power Control Setup
No Signal Off
No Operation Off [Disable]
[Disable]
Disable Enable
RECEIVER
POWER
TV/SAT/DVD
RETURN MENU
SET/
ENTER
MENU
FAVORITE CH
DTV/DVD TOP
SOURCE DTV/SAT
DTV/SAT
VCR REC
A B C D
POWER
MENU
GUIDE
INPUT VOL ؁ VOL ؀
INFO
RECEIVER
POWER
TV/SAT/DVD
RETURN MENU
SET/
ENTER
MENU
FAVORITE CH
DTV/DVD TOP
SOURCE DTV/SAT
DTV/SAT
VCR REC
A B C D
POWER
MENU
GUIDE
INPUT VOL ؁ VOL ؀
INFO
Power control
Power control setting allows you to save energy.
Power control for AV source