Sharp Aquos LC 37HV6U - Manual (Page 43)

42
Using external equipment
AVC System
(rear view)
DVD player
S-video cable
(commercially available)
When using component
video cable, select
“COMPONENT” for
“Input Select” in the
menu.
Watching a DVD image
Connecting a DVD player
You can use the INPUT 1 terminal when connecting to a DVD player and other audiovisual equipment.
Displaying a DVD image
INPUT
TV
ANT-A/B
TWIN
MODE
AV
POWER
MTS CC
PICTURE SELECT
SUB TWIN CH
FREEZE MODE
VIEW
SLEEP LEARN EDIT/ DISPLAY
INPUT
TV VCR CBL
/SAT
/DTV DVD
/LD
Virtual
AV cable
(commercially available)
Component video cable
(commercially available)
TV MENU [Option ... Input Select]
Auto
COMPONENT
AV-Y/C
For INPUT1 signal
Display
INPUT button
To watch a DVD image, select “INPUT1” from
“INPUT SOURCE” menu using INPUT on the
remote control unit or on the Display. (See
page 52.)
INPUT SOURCE
TV
INPUT1
INPUT2
INPUT3
INPUT4
PC
2
1
Select the desired signal type on “Input
Select” in the “Option” menu. (See page 52.)
The setting is stored and can be selected on the
“INPUT SOURCE” menu.
NOTE
• Each time INPUT is pressed, the input source toggles.
• If the DVD image does not come in clearly, you may need
to change the input signal type setting on the “Input Select”
menu.
• Refer to your DVD player operation manual for the signal
type.