Storage & care – Steamfast CANISTER STEAM CLEANER SF-275 User Manual

Page 12

Advertising
background image

12 | ENGLISH

Storage & Care

PROPER STORAGE

Preparing your Canister Steam Cleaner for storage is quick and simple. When you have finished

your steaming tasks, follow the steps listed below.
1. Set Lighted On/Off Switch to “OFF” position and unplug power cord from electrical outlet.

2. Allow unit to cool (at least 30 minutes for complete cooling).

3. Press and hold Steam Button to release all remaining steam pressure.

4. Remove all accessories from unit.

5. Flip Storage Compartment lid open and remove Boiler cap.

6. Drain any remaining water from Boiler into a sink or tub – this will help to minimize mineral

build-up and prevent over-filling during your next use. Loosely replace Boiler cap.

7. Store accessories safely away, near Canister Steam Cleaner. Utility Brushes can be conveniently

stored in the Storage Compartment.

8. Close Storage Compartment lid and store Canister Steam Cleaner in a cool, dry location.

MINERAL BUILD-UP

A common maintenance need for steam appliances is the removal of build-up caused by high

mineral content in many municipal water supplies. This mineral build-up may limit the

effectiveness and reduce the life of your Canister Steam Cleaner.
The best way to minimize mineral build-up is to use distilled or de-mineralized water when

using your Canister Steam Cleaner. If you are unable to use distilled water, it is recommended

that the following procedure be followed monthly to help remove any mineral build-up:

1. Set Lighted On/Off Switch to “OFF” position and unplug power cord from electrical outlet.

2. Allow unit to cool (at least 30 minutes for complete cooling).

3. Press and hold Steam Button to release all remaining steam pressure.

4. Remove all accessories from unit.

5. Flip up Storage Compartment lid and remove Boiler cap.

6. Drain water from Boiler into a sink or tub.

7. Fill Measuring Cup with 16 oz. (474 ml.) distilled vinegar.

8. Carefully pour vinegar into Boiler. Slowly shake or move unit around to agitate vinegar.

9. Allow to stand for at least 40 minutes, or more if possible.

10. Drain vinegar from Boiler.

11. Rinse Boiler with fresh water, drain and repeat until vinegar odor dissipates.

12. Loosely replace Boiler cap and close Storage Compartment lid.

Advertising