Steamfast CANISTER STEAM CLEANER SF-275 - Manual (Page 9)

ENGLISH | 9
SCRUB PAD
NOTE: Scrub Pad connects to the Steam Jet Nozzle,
not the Main Nozzle.
1. Place Scrub Pad over tip of Steam Jet Nozzle, and firmly
press it on to Steam Jet Nozzle as far as possible (FIGURE 6).
This will help to prevent steam leakage.
2. To remove Scrub Pad, simply grip it firmly and pull it off of
Steam Jet Nozzle.
CARRY HANDLE
1. Insert Carry Handle into hole on top of
unit. Align handle so that grip bracket
faces towards front of unit (FIGURE 7).
2. Use enclosed Screw Driver to tighten
screw found inside Carry Handle, until
secured to main unit.
ORDERING ACCESSORIES & PARTS
Replacement accessories and parts for your Canister Steam Cleaner (model SF-275) may be
ordered through our web site:
www.steamfast.com
You may also contact Consumer Service directly:
[email protected] or 1-800-711-6617
FIGURE 7
FIGURE 6