Symphonic WF20D4 - Manual (Page 20)

– 20 – EN
0C28
BASIC PLAYBACK
Getting started
¡ Turn on the power of amplifier and any other com-
ponents, if necessary.
1 Press POWER.
¡ The power will turn on.
2 Press OPEN/CLOSE to open disc loading
tray.
3 Place the chosen disc in the tray, with the
label facing up.
MP3 CD DVD-V
PLAYING A DISC
4 Press PLAY.
¡ The tray will close automatically and playback will
then start from the first chapter or track of the disc.
If the playback does not start automatically, press
PLAY.
¡ When you playback a DVD which features a title
menu, it may appear on the screen. In this case, refer
to “TITLE MENU”.
5 Press STOP to stop playback.
NOTES:
¡ When the DVD mode has been switched to the TV
mode, the DVD mode shuts down first and then the
TV picture and sound appears in about 4 seconds.
Similarly, when POWER is pressed to turn off in the
DVD mode, this mode shuts down first and then the
unit’s power is turned off.
¡ A “prohibited icon” may appear at
the top-right on the TV screen dur-
ing operation, warning that a pro-
hibited operation has been encoun-
tered by the DVD or the disc.
¡ With DVDs that use titles for playback program sig-
nals, playback may start from the second title or it
may skip these titles.
¡ During the playback of a two layered disc, pictures
may stop for a moment. This happens when the 1st
layer switches to the 2nd layer. This is not a mal-
function.
GENERAL FEATURES
DVD may contain menus to navigate the disc and access
special features. Press appropriate number buttons or
use Arrow (
K / L / s / B ) to highlight your selection in the
DVD main menu and press ENTER to confirm.
NOTES:
¡ Select DVD mode by pressing SELECT on the
remote control. Then press PLAY or OPEN/CLOSE
before you operate the DVD functions.
¡ Unless stated, all operations described are based on
remote control use. Some operations can be carried
out using the menu bar on the TV screen.
DVD-V
TITLE MENU
1 Press TITLE on the remote control.
¡ The title menu will appear.
2 If the feature is not available, symbol
may appear on the TV screen.
3 Press Arrow ( K / L / s / B ) to select an item
and ENTER to confirm selection.
DVD-V
DISC MENU
1 Press DISC MENU on the remote control.
¡ The DVD main menu will appear.
2 If the feature is not available, symbol
may appear on the TV screen.
3 If disc menu is available on the disc, audio
language, subtitle options, chapters for the
title and other options will appear for selec-
tion.
4 Press Arrow ( K / L / s / B ) to select an item
and ENTER to confirm selection.
DVD-V
CALLING UP A MENU SCREEN
DURING PLAYBACK
¡ Press DISC MENU to call up the DVD menu.
¡ Press TITLE to call up the title menu.
NOTE:
¡ Contents of menus and corresponding menu opera-
tions may vary between discs. Refer to the manual
accompanying the disc for details.