Symphonic WF20D4 - Manual (Page 24)

– 24 – EN
0C28
When a CD with MP3 files is in the unit, press DISC
MENU to call up the MP3 menu on the TV screen.
1 In stop mode, press Arrow ( K / L ) to select
the desired group or track.
¡ If a group is selected, press
B
or ENTER to go on to the
track selection screen. Press
Arrow (
K / L ) to choose a
track, then press ENTER.
¡ If a track is selected, press
ENTER to start playing
tracks. Starting from the one you’ve just chosen the
subsequent tracks will be played.
¡ Press TITLE to return to the first item.
2 Press STOP to stop playback.
NOTES:
¡ Folders are known as Groups; files are known as
Tracks.
¡ MP3 files are accompanied by icon.
¡ Maximum of 255 folders can be recognized.
¡ Maximum of 512 files can be recognized.
¡ Up to 8 hierarchies can be created.
This unit recommends the use of files recorded at the
below specifications:
¡ Sampling frequency: 44.1kHz or 48kHz
¡ Constant bit rate: 112kbps ~ 320kbps.
3
MP3
MP3 PLAYBACK
folder name 1
folder name 2
folder name 3
folder name 4
file name 1
file name 2
file name 3
folder name 1
PLAYING A MP3 DISC
RANDOM PLAYBACK
1 In stop mode, press MODE twice.
¡ RANDOM screen appears.
2 Press PLAY to start random playback.
MP3
This feature allows you to program an MP3 disc to
play in a desired sequence.
1 In stop mode, press MODE.
¡ The PROGRAM screen will appear.
2 Select a desired track using Arrow
(
K / L /s/B ). Then press ENTER.
¡ Press B when you want to go to the next hierarchy.
¡ Press s when you want to go back to the previous
hierarchy.
¡ Press CLEAR to erase the most recently entered pro-
gram.
3 Repeat step [2] until you have selected all
the tracks you want to play in the program.
4 Press PLAY to start programmed playback.
NOTES:
¡ While the program is being played back, the STOP
works as follows.
¡ Press STOP once and then PLAY again, playback
will restart from the point where STOP was pressed.
(Program continued)
¡ Press STOP twice and then PLAY again, playback will
restart from the track in the usual way. (Program cleared)
¡ To erase all tracks in the program at once, select
ALL CLEAR at the bottom of the list at Step [2].
MP3
PROGRAM
REPEAT
REPEAT is available only during playback.
To activate the repeat function, press REPEAT
during playback.
¡ The repeat mode changes as described below every
time you press the button.
MP3
TRACK ALL OFF
(current track
repeat) (entire disc
repeat) (repeat off)
NOTE:
¡ Repeat setting will be cleared when moving to other
track.
GROUP
(current group
repeat)