Samsung CX2 - Manual (Page 172)

170
Set
up Menu
7
To adjust the brightness of the picture display, follow the steps
below.
1
Display the setup menu.
• For the operating procedure, see P.166.
2
Press the ADJ./OK button " to
select [LCD Brightness] and
press the button $.
3
Press the button !" to adjust
the brightness.
• Move the slider on the LCD brightness
adjustment bar down to make the
picture display darker and up to make
it brighter. The brightness of the
picture display changes as the slider is
moved along the bar.
• To cancel brightness adjustment, press the DISP. button to cancel the
setting and return to the shooting menu.
4
When you reach the desired brightness, press the ADJ./
OK button.
• The display returns to the setup menu.
5
Press the MENU button or the ADJ./OK button.
Note ----------------------------------------------------------------------------------------------
• When [LCD Auto Dim] is set to [On] on the setup menu (GP.184), the picture
display dims to conserve battery power if the camera is not moved for approximately
five seconds. Move the camera or press any button to return to the original picture
display brightness.
• The brightness display shows the view through the lens (shooting mode) or the most
recently viewed picture (playback mode; if no picture is available for playback, no
image will be shown in the brightness display).
Adjusting the Picture Display
Brightness