Samsung CX2 - Manual (Page 49)

If y
ou are u
sing
th
e cam
er
a
for t
h
e f
irst tim
e, read
thi
s sectio
n.
47
• Files displayed with the S
symbol are images taken with
M-Cont Plus, Speed Cont, or
Multi-trgt AF. See P.132 for more
information on playing back
images.
• To switch the camera from playback mode to shooting mode,
press the 6 button again.
Note ---------------------------------------------------------------------------------------------------
Setting your favorite image files to [Flag Function Setting] on the playback menu allows
you to easily display these files. (GP.140)
Checking the image in shooting mode----------------------------------------------------
In shooting mode, immediately after you take a still image, the still image is displayed
on the screen for a moment so you can check it. You can change the image display
time using [LCD Confirmation Time] on the setup menu. (GP.182)
When [LCD Confirmation Time] is set to [Hold], the image remains displayed until the
next time you half-press the shutter release button. When [LCD Confirmation Time] is
set to [Hold], the displayed image can also be enlarged or deleted. (GP.50, 52)
Turning on the camera in playback mode------------------------------------------------
When the camera is off, pressing and holding the 6 (Playback) button turns the
camera on. (The camera starts up in playback mode.)
When the camera has been turned on with the 6 button, pressing the 6 button
again switches playback mode to shooting mode.
Where images are played back from-------------------------------------------------------
When no SD memory card is loaded, the camera plays back from the internal memory.
When an SD memory card is loaded, it plays back from the SD memory card.