Sound Performance Lab EQ MAGIX - Manual (Page 11)

11
Rear panel
E EQ Q M MA AG GIIX X rre ea arr p pa an ne ell
electronically balanced mic/line input; pin 2 = hot / pin 3 = cold
unbalanced I NSERT S END /R ETURN jacks
outputs: XLR (balanced, +6dB) and jack (unbalanced, 0dB)
mains voltage selector: 220-240V / 50Hz or 100-120V / 60Hz
G ND L IFT switch and binding post for alternative ground connection
mains inlet connector for non-heating appliances with detachable
3-pole mains cable
Connection
examples
Microphone:
Announcer or
singer, acoustic
instrument
Guitar amp
miking
Insert Send/Return:
The microphone signal
can be looped through
other processors (e.g.
compressor, limiter,
reverb or effects unit).
The signal can be
recorded directly
onto one or two
tracks of a multi-
track recorder
The EQ MAGIX output signal can
be fed into one or two insert
returns of a mixing desk.
GND LIFT helps to
prevent hum loops.
An alternative
ground connection
can be made via this
binding post.
Sampler
Keyboard, Workstation
Output Input
Return Output 1 & 2 Send Mic/Line Input Output 3 & 4
Select the right
mains voltage here:
230V or 115V.
Feed in the power of
electrical life for your EQ
MAGIX here.
Only use the mains cable
supplied.