Washing machine won’t work? (continue) – Samsung DC68-01922A User Manual

Page 14

Advertising
background image

- 14 -

WASHING MACHINE WON’T WORK? (Continue)

The water leaks at the water supply hose connector.

Check 1> If the faucet connecting part is loose, water may leak.

➜ Repeat the assembling steps again.

(Refer to “Connecting the water supply hose”)

Check 2> Check if the rubber packing of water supply hose is in the right

position.
➜ Screw tightly again.

Check 3> Is the water supply hose folded?

➜ Unfold the hose.

Check 4> If the water supply is too strong, water may leak.

➜ Close the faucet a little.

Check 5> Is water leaking from the faucet itself?

➜ Fix the faucet. Water is not supplied.

Check 6> Did you press the Start/Hold button after selecting the water supply?

➜ If the Start/Hold button is not pressed, water is not supplied.

Press the Start/Hold button.

Check 7> Is the faucet closed?

➜ Turn on the faucet.

Check 8> Is the filter net at the water supply hose connector clogged with

dirty matters?
➜ Clean the filter net by brushing with a toothbrush.

Check 9> Is the water supply cut off?

➜ If the water supply is suspended, turn off the faucet and power off.

Spinning makes loud noises and vibrations.

Check 1> Check if the laundry is spread evenly in the washer.

➜ Spread out the laundry evenly and start again.

Check 2> Check if the washing machine levels on a sturdy flat floor.

Set the machine at level.

Check 3> Is the handle for leveling legs loose?

➜ Adjust the legs on the feet for leveling.

Check 4> Is around the washing machine filled with unnecessary stuffs?

➜ Remove those unnecessary things away from the wash

machine.

IN CASE THE NEED FOR SERVICING ARISES.

If any problem occurs with your products, do not hestitate to call any nearby.
Name, address, telephone number is required.

SAMSUNG ELECTRONICS CO.,LTD 416, MAETAN-3DONG, SUWON, KOREA

SPECIFICATIONS

For operating VOLTAGE and FREQUENCY, see the LABEL-RATING on the
back of washing machine.

POWER
CONSUMPTION

WASH

426W

STANDARD
WATER
LEVEL

MAXIMUM

75

l

SPIN

270W

HIGH

62

l

DIMENSIONS(mm)

W599xD637xH968

MEDIUM

53

l

LOW

42

l

E/LOW

28

l

WEIGHT

48 kg

WATER USAGE

195

l

WATER PRESSURE

0.05~0.78 MPa

(0.5 ~ 8.0kg . f/cm

2

)

PULSATOR ROTATING
SPEED

100 rpm

WASHING TYPE

Stirring Type

SPIN SPEED

680 rpm

Advertising