Sony 3-284-083-41(1) - Manual (Page 49)

49 GB
En
jo
yi
n
g
Surr
ou
nd
So
un
d
Listening to the sound
without any adjustment
(ANALOG DIRECT)
You can switch the audio of the selected input
to two channel analog input. This function
enables you to enjoy high quality analog
sources.
When using this function, only the volume and
front speaker balance can be adjusted.
1
Turn INPUT SELECTOR on the
receiver to select the input you
want to listen to in analog
audio.
You can also use the input buttons on the
remote.
2
Press ANALOG DIRECT on the
receiver.
The analog audio is output.
To cancel ANALOG DIRECT
Press ANALOG DIRECT on the receiver
again.
You can also press any sound field buttons.
Note
When headphones are connected, “HP DIR” appears
on the display.
Resetting sound fields to
the initial settings
Be sure to use the buttons on the receiver for
this operation.
1
Press ?/1 to turn off the power.
2
While holding down 2CH, press
?/1.
“S.F. CLR.” appears on the display and
all sound fields are reset to their initial
setting.
?/1
SPEAKERS (ON/OFF)
PHONES
MEMORY/ ENTER TUNING MODE TUNING 2CH A.F.D. MOVIE MUSIC
ANALOG DIRECT MUTING
INPUT SELECTOR
AUTO CAL MIC
DISPLAY INPUT MODE
MASTER VOLUME
1 2 Sound field
buttons
?/1
SPEAKERS (ON/OFF)
PHONES
MEMORY/ ENTER TUNING MODE TUNING 2CH A.F.D. MOVIE MUSIC
ANALOG DIRECT MUTING
INPUT SELECTOR
AUTO CAL MIC
DISPLAY INPUT MODE
MASTER VOLUME
1,2
2