Sony 3-284-083-41(1) - Manual (Page 7)

7 GB
Getting Star
ted
About the indicators on the display
SW LFE
L C R
SL S SR
; D ; PLII ; PL OPT DTS MEMORY RDS ST
MONO D.RANGE COAX HDMI
1 2 3 4 5 6 8 7
9 q; qa qs qd
Name Function
A SW
Lights up when sub woofer
selection is set to “YES” (page
40) and the audio signal is
output from the SUB
WOOFER jack.
B LFE Lights up when the disc being
played back contains an LFE
(Low Frequency Effect)
channel and the LFE channel
signal is actually being
reproduced.
C ; D Lights up when the receiver is
decoding Dolby Digital
signals.
Note
When playing a Dolby Digital
format disc, be sure that you
have made digital connections
and that INPUT MODE is set
to “AUTO” (page 55).
D ; PL/
; PLII
“; PL” lights up when the
receiver applies Pro Logic
processing to 2 channel signals
in order to output the center and
surround channel signals.
“; PLII” lights up when the
Pro Logic II Movie/Music
decoder is activated.
However, these indicators do
not light up if both the center
and surround speakers are set to
“NO” (page 36) and you select
a sound field using the A.F.D.
button.
Name Function
E OPT
Lights up when BD input is
selected. However,
“UNLOCK” appears on the
display if no digital signal is
input through the OPTICAL
jack. “OPT” also lights up
when SAT input is selected if
INPUT MODE is set to
“AUTO” and the source signal
is a digital signal being input
through the OPTICAL jack.
F DTS
Lights up when the receiver is
decoding DTS signals.
Note
When playing a DTS format
disc, be sure that you have
made digital connections and
that INPUT MODE is set to
“AUTO” (page 55).
G MEMORY
Lights up when a memory
function, such as Preset
Memory (page 52), etc., is
activated.
H Tuner
indicators
Lights up when using the
receiver to tune in radio
stations (page 50), etc.
Note
“RDS” appears for models of
area code CEL, CEK, ECE
only.
I Preset
station
indicators
Lights up when using the
receiver to tune in radio
stations you have preset. For
details on presetting radio
stations, see page 51.
continued