Sony DPF-VR100 - Manual (Page 26)

\\Miyoshi-win\data1 (k)\+++NouhinMiyoshi+++\DPF-XR100_IM\0825M_4259434111XR100.VR100_IM_GB\060C04.fm
Master: Left
DPF-XR100/VR100 4-259-440-11 (1)
26 GB
Maintenance mode
Activating maintenance mode
1
Confirm that the photo frame is turned off.
2
Press while holding down VIEW MODE on the
photo frame to turn it on.
Hold down VIEW MODE until the following screen appears.
Maintenance mode is activated.
3
Press v/V to select [Update firmware ] or [Initialize
system] and press .
Update firmware:
For detailed information on how to obtain an update file or how
to update the firmware, access and view http://www.sony.net/
DPF.
Initialize system:
The operation screen is displayed.
Go to “Initializing the system” below.
z Tip
Perform firmware update or system
initialization of the photo frame in
the following cases:
Firmware update:
Firmware update allows you to
obtain optimum performance and
use the photo frame with upgraded
functions.
System initialization:
When your photo frame does not
start properly, initialize the system
of the photo frame. If the symptom
persists, consult with your Sony
dealer.
010COV.book Page 26 Wednesday, August 25, 2010 12:06 PM