Sony DPF-VR100 - Manual (Page 30)

\\Miyoshi-win\data1 (k)\+++NouhinMiyoshi+++\DPF-XR100_IM\0825M_4259434111XR100.VR100_IM_GB\060C04.fm
Master: Left
DPF-XR100/VR100 4-259-440-11 (1)
30 GB
Connecting to a computer
1
Connect the AC adaptor to the photo frame, and to an
AC outlet.
2
Connect the computer and photo frame with a
commercially available USB cable.
3
Turn the photo frame on.
4
Operate the computer to exchange images with the
internal memory of the photo frame.
System Requirements
x Windows
Recommended OS: Microsoft Windows 7/Windows Vista SP2 /
Windows XP SP3
Port: USB port
x Macintosh
Recommended OS: Mac OS X (v10.4 or later)
Port: USB port
To USB mini B connector
To USB connector
Computer
P Notes
• Use a Mini B-Type USB cable.*
* When you use a commercially
available USB cable, use a
USB cable with a mini B-type
plug (for the USB Mini B
connector of this unit, frame-
side connector type) shorter
than 3 meters.
• If multiple USB devices are
connected to a computer or if a
hub is used, a problem may occur.
In such a case, simplify the
connection.
• You cannot operate the photo
frame from another USB device
being used simultaneously.
• Do not disconnect the USB cable
during data communication.
• Operation with all computers that
satisfy the recommended system
requirements is not guaranteed.
• The photo frame has been
demonstrated as operable when
connected to a computer or Sony
digital photo printer. When other
devices are connected to the photo
frame, these devices may not
recognize the internal memory of
photo frame.
• Use a USB cable with the USB
logo.
010COV.book Page 30 Wednesday, August 25, 2010 12:06 PM