Sony SMP-N100 - Manual (Page 20)

20
YCbCr/RGB (HDMI)
HDMI Deep Colour Output
Pause Mode
Audio Settings
Audio (HDMI)
Dolby Digital
DTS
Audio DRC
Auto Automatically detects the
connected TV type, and
switches to the matching
colour setting.
YCbCr (4:2:2) Outputs YCbCr 4:2:2 video
signals.
YCbCr (4:4:4) Outputs YCbCr 4:4:4 video
signals.
RGB Outputs RGB video signals.
Auto Normally select this.
12bit Outputs 12bit/10bit video
signals when the connected
TV is compatible with Deep
Colour.
10bit
Off Select this when the picture
is unstable or colours appear
unnatural.
Auto Normally select this.
Dynamic moving pictures
appear without blurring.
Frame Displays static pictures at
high resolution.
Auto Normally select this.
Outputs audio signals
according to the status of the
connected HDMI device.
PCM Outputs PCM signals from
the HDMI OUT jack.
Downmix
PCM Converts to output Linear
PCM signals. Select this
when connecting an audio
device without a built-in
Dolby Digital decoder.
Dolby Digital Select this when connecting
an audio device with a built-
in Dolby Digital decoder.
Downmix
PCM Converts to output Linear
PCM signals. Select this
when connecting to an audio
device without a built-in
DTS decoder.
DTS Select this when connecting
to an audio device with a
built-in DTS decoder.
Auto Performs playback at the
dynamic range specified by
the current file.
Standard Performs playback at a
standard compression level.
Wide Range No compression works. A
more dynamic sound is
produced.