Schneider Electric 560125D/2 - Manual (Page 12)

Multi Room Audio Amplifier Installation Instructions
12
3.2 C-Bus Connection
Each amplifier has a connection to the C-Bus network. C-Bus wall switches control
the volume, bass and treble settings for the amplifier via the C-Bus network. C-Bus
Toolkit configuration software is used to configure wall switches to control the
amplifiers. Refer to the
C-Bus Multi Room Audio Amplifier User's Guide , the wall
switch documents, and C-Bus Toolkit Help.
The C-Bus network cables for the 560125D/2 and 560125R/2 high power amplifiers
use RJ45 plugs. The C-Bus network cable for the 560110R Low Power Remote
Amplifier is terminated with a screw-type connector. Figure 4 shows the C-Bus
network cable wire assignments for both connector types.
Figure 4. C-Bus network cable termination
Figure 5 shows the rear panel connection points for the C-Bus network cables.
Figure 5. C-Bus network connectors on the back panels