Schneider Electric 560125D/2 - Manual (Page 17)

Multi Room Audio Amplifier Installation Instructions
17
560110R Low Power Remote
Parameter Description
Supply Voltage 27 V d.c. when powered by the Matrix
Switcher (via digital audio connection),
and/or
24 V DC @ 1.25A when using the external
power supply or switch mode power
supply
C-Bus supply voltage 15 to 36 V d.c.
C-Bus sink current 22 mA
Power consumption 30 W maximum
Maximum power output 10 W RMS into 4
Ω (0.514% THD)
Frequency response 40 Hz to 20 kHz (±1 dB)
Total harmonic distortion
(1 kHz, 20 W RMS into 4
Ω)
0.36% (using analogue input)
Signal to noise ratio > 67 db (peak, unweighted)
C-Bus network clock and
burden Software selectable
Analogue input signal level
(Local inputs) 2.8 V p-p maximum (47 k Ω)
D/A conversion 16 bit PCM
Operating temperature 10 to 70 °C (50 to 158 °F)
Operating humidity 10 to 90% RH (non-condensing)
Dimensions (H x W x D) 40 mm x 120 mm x 158 mm