Speco Technologies LCD Monitor VM19LCD - Manual (Page 3)

type plug has two blades and a third grounding prong.
● This monitor is designed to operate on 100-240V AC supply. Do not
connect too many appliances to the same outlet as this can cause electric
shock.
MOUNTING
● Place the monitor on a secure table or have it properly mounted to the
wall. Do not hang anything on the monitor.
Caution: The wall mount must bear a m inimum of five times the monitor’s
net weight without causing damage. To mount your monitor to the wall,
you will need to remove the base before attaching the wall mount.
A. Place the monitor face down on a surface that is soft, yet strong enough
to hold the monitor.
B. Use a screwdriver to remove the screws from the four holes on each side
of the bottom of the monitor
’s base (only use with base)
C. Make sure all cables are already connected to the monitor.
D. Follow the directions included with the wall mount to mount the monitor
to the wall.
INACTIVE
● Unplug the monitor when unused for long periods of time.
VENTILATION
● Never cover or block the ventilation slits in the monitor. Ventilation slits
are provided to prevent the temperature from rising. A minimum distance
of at least 10 cm should be maintained around the unit for sufficient
ventilation.
● Never insert any foreign object, metal or liquid into the ventilation slits, as
this could result in fire or electric shock.
● Do not install the DVR or other equipment too close to the monitor.
Keep equipment at least 30 cm away from the monitor.
WATER AND MOISTURE
● The monitor should not be exposed to dripping or splashing. No
objects filled with liquids should be placed on the monitor.
● Do not use the monitor near water.
● Do not touch the monitor or cable with wet hands as this may cause
electric shock or damage.
CLEANING
● Unplug the unit from the wall outlet before cleaning.
● Do not use liquid or aerosol cleaners. Use a dry soft lint-free cloth for
cleaning. If the dust is persistent, wipe with a slightly damp cloth.
SERVICE
● Use only the power source and connections appropriate for the monitor as
indicated on the marking label.
● If the power cord or plug is damaged, liquid has been spilled,
objects have fallen into the apparatus, apparatus has been exposed to
rain or moisture, does not operate manually, or has been dropped, the
product needs servicing.
4 3