Speco Technologies LCD Monitor VM19LCD - Manual (Page 6)

If you want to use an external input source, before to select the source, you
need to connect the devices, otherwise when you select the source, the
none or no signal will appear on the screen. Press the source button on the
monitor or remote control and the menu will appear on the screen. Then
press source to select the monitor item a
nd press“ +/- ” to save it.
VGA: The input source from VGA terminal output.
DVI: The input source from DVI terminal output.
AV: The input source from AV or video camera terminal output.
BASIC ON-SCREEN DISPLAY SETUP
(1) Press the MENU button to see the menu.
(2) Press
＋ or － to select the menu item and press SOURCE button to
select the Sub menu.
(3) Press
＋ or － to adjust the settings.
(4) Press the MENU button to return to the previous menu.
1. VGA Input Mode
PICTURE
Color temp.
CONTRAST: Adjusts the difference
between the light and dark areas of the
picture. (Adjustment range:0-100)
BRIGHTNESS: Adjusts the brightness of
the picture. (Adjustment range:0-100)
COLOR TEMP: Press + or
－ button to
go into the Color Temp sub menu. Press
the “+” button to change the color intensity
of the temperature selected (Normal,
Warm, Cool, S-RGB, User)
USER : USER-R: 0~255
USER-G: 0~255
USER-B: 0~255
.
9
10
11
Controls Menu Setup