Print head balance adjustment – SATO M 8400RVe User Manual
Page 9
Advertising
<
previous | home |
next >
EZ Manual: M-8400RVe
9
Barcode SATO International Pte Ltd
Print Head Balance
Adjustment
Major Adjustment
Required equipment
“+”Screw-driver
(JIS No.2 equivalent)
STEPS
1 Loosen the set screw.
2 Turn the adjust screw to make adjustment.
3 If the front side of label is too light, turn the screw in
clockwise direction.
4 If the front side of label is too dark, turn the screw in
counter-clockwise direction.
Turn the adjust screw in clockwise or
in counter-clockwise direction depending on the situation
Loosen the set screw
Advertising