Sangean ATS-606A - Manual (Page 50)

1.Press the numbered buttons to activate alarm-
on time. Using 24 hour time, an example will be,
if you set the alarm on time at 1:30PM, press the
button [1] [3] [3] [0] and "ENTER" button.
Display will show 13:30 and "STANDBY" will
stop flashing indicating alarmed by radio has
been set at 1:30 PM.
If the wrong number was keyed-in, to delete by
pressing "C" button. each number for every push
on the "C" button.
If the time you key in does not exist like 25:30,
display will show "E" for about 2 seconds and back
to original time.
49
-STANDBY-
120m 90m 75m
60m 49m 41m
31m 25m 21m
19m 16m 13m
1 2 3
4 5 6
7 8
0 C
9
11m
M
FREQ
ENTER
TIME SET
-STANDBY-