Setting alarm by hws buzzer – Sangean ATS-606A User Manual

Page 52

Advertising
background image

5.To cancel the alarm time, press "STANDBY" but-
ton and display "STANDBY" will flash, press
"
C" button to cancel.

1.When alarm is on press "POWER/SLEEP' button to turn off the alarm.
2.The radio alarm will last for one hour if not turned off by pushing POWER/SLEEP button.
3.Tune the radio before setting radio alarm. When alarm is on, the radio will play according to last
frequency or station selected.

Note

HWS-Humane Waking system.
A repeating beep tone sounds when using the set buzzer. The alarm buzzer volume increases every
15 seconds for 1 minute then silences for 1 minute before beginning the cycle. Again HWS will continue
this pattern for 30 minutes.

SETTING ALARM BY HWS BUZZER

51

13m

C

Advertising