Samsung Digimax A400 - Manual (Page 19)

19
LCD monitor indicator
14 ISO p.32
15 Sharpness p.43
16 Image quality p.39
17 Image size 2272, 2048, 1600, 1024, 640 p.38
Number of available shots remaining 18
Remaining time (Movie clip/ Voice recording) 00:01:25/ 00:24:52
19 Voice memo p.24
20 Optical zoom/ Digital Zoom rate
18
Starting the recording mode
Recording a Movie clip
1. Insert the batteries (p.14). Insert the batteries taking note of the polarity (+ / -).
2. Insert the memory card. (p.17)
As this camera has a 16MB internal memory, you do not need
to insert the memory card. If the memory card is not inserted,
an image will be stored in the internal memory. If the memory
card is inserted, an image will be stored on the memory card.
3. Close the battery chamber cover.
4. Press the power button to turn on the camera.
5. Select the MOVIE CLIP( ) mode by sliding the
mode switch.
6. Point the camera towards the subject and compose the
image by using the LCD monitor.
7. Press the shutter button to take a movie clip.
Press the shutter button once and movie clips are
recorded for as long as the available recording time
allows. Movie clips will still be recorded if the shutter
button is released. If you wish to stop recording, press the shutter button again.
Image size and type are listed below.
- Image size : 640X480, 320X240 (Selectable)
- File type : *. avi(MJPEG)
[ MOVIE CLIP mode ]
S ST TA AN ND DB BY Y
If the memory card is inserted in the camera, all the camera functions apply only to the
memory card. If the memory card is not inserted in the camera, all the camera functions apply
only to the internal memory.