Samsung Digimax A400 - Manual (Page 77)

77
Selecting Video out type
The video output signal from the camera can be NTSC or PAL.
Your choice of output will be governed by the type of device (monitor or TV, etc.) to which the
camera is connected. PAL mode can support only BDGHI.
Setting the Video Out Type
1. In any mode with the exception of Voice Recording mode,
press the MENU button.
2. Press the LEFT/ RIGHT button and select the [SETUP]
menu tab.
3. Select the [VIDEO] menu by pressing the UP/ DOWN
button and press the RIGHT button.
4. Select a desired sub menu by pressing the UP/ DOWN
button and press the OK button.
[VIDEO] sub menu : NTSC, PAL
5. Press the menu button twice and the menu will disappear.
NTSC : U.S.A, Canada, Japan, South Korea, Taiwan, Mexico.
PAL
: Australia, Austria, Belgium, China, Denmark, Finland, Germany, U.K., Holland,
Italy, Kuwait, Malaysia, New Zealand, Singapore, Spain, Sweden, Switzerland,
Thailand, Norway.
When using a TV as an external monitor, you will need to select the external or AV
channel of the TV.
There will be a digital noise on the external monitor, but it is not a malfunction.
If the image is not in the centre of the screen, use the TV controls to centre it.
When the camera is connected to an external monitor, the menu will be visible on the external
monitor and the menu functions are the same as those indicated on the LCD monitor.
When you connect the camera to a display device like TV with video cable, the sound
embedded in a still image or a movie clip can't be played back.
INFORMATION
Connecting to an external monitor
In RECORDING/ PLAY mode, you can view
the stored still images or movie clips by
connecting the camera to an external
monitor via the VIDEO cable. When the
camera is connected to an external monitor,
the LCD monitor will be turned off
automatically.
Yellow colour-Video
2048
SETUP
BEEP
USB
VIDEO
NTSC
PAL
SET:OK BACK: