Sony Ericsson LMD-2030W - Manual (Page 7)

7 Features
Blue only mode
In the blue only mode, a monochrome display is obtained with all
the three R/G/B picture elements driven with a blue signal.
This mode is convenient for chroma and phase adjustments and
monitoring of VCR noise.
Marker function
CENTER MARKER, 16:9 MARKER for the 4:3 aspect ratio or
4:3 MARKER for the 16:9 aspect ratio can be displayed.
Scan setting
You can set the display size to under scan, over scan or full screen
mode.
Select color temperature and gamma mode
You can select the color temperature from among two (HIGH and
LOW) settings.
You can select the gamma mode from among five settings.
Aspect setting
You can set the monitor to 4:3 or 16:9 display mode according to
the input video signal.
On-screen menus
You can set the appropriate settings according to the connected
system by using the on-screen menus.
Select language display
You can select from seven display languages English, French,
German, Italian, Spanish, Japanese and Chinese.
Key inhibit function
You can inhibit a key, function to prevent misoperation.