Sharp UX-B30 - Manual (Page 12)

8
FUNCTION key
Press this key followed by the arrow keys to select special functions and
settings.
Number keys
Use these keys to dial numbers, and enter numbers and letters when storing
auto-dial numbers.
POLL key
Press this key after dialling another fax machine to receive a document
(previously loaded in the other machine’s feeder) without assistance from the
operator of the other machine (page 83).
HOLD key
Press this key to put the other party on hold during a phone conversation
(page 63).
SPEAKER key
Press this key to listen to the line and fax tones through the speaker when
faxing a document (page 43).
Note: This is not a speakerphone. You must pick up the handset to talk with
the other party.
STOP key
Press this key to cancel an operation before it is completed.
START/MEMORY key
Press this key after dialling to begin fax transmission (page 44). Press this key
before dialling to send a fax through memory (page 54). The key can also be
pressed in the date and time display to show the percentage of memory
currently used.
COPY/HELP key
When a document is in the feeder, press this key to make a copy of the
document (page 69). At any other time, press this key to print out the Help
List, a quick reference guide to the operation of your fax machine.
11
10
9
8
7
12
13
6
all.book Page 8 Tuesday, June 1, 2004 4:24 PM