Sharp UX-B30 - Manual (Page 25)

Installing the Print Cartridge
21
1. Installation
15
Press the number keys to enter the number of the straightest line.
Example:
•
If you make a mistake, press and then repeat the entry.
16
Press .
•
This completes the alignment procedure.
STOP
START/
SPEICHER
Note: If at any time the display shows the
alternating messages at right, check the printing
paper. If the tray is empty, add paper. If there is
paper in the tray, take it out and then reinsert it.
When you are finished, press .
START/
SPEICHER
ADD PAPER &
PRESS START KEY
Quality mode(using more/less ink)
If you prefer a higher quality image when printing faxes and copies, turn on
Quality mode. If you wish to use less ink or speed up ink drying time, turn off
Quality mode.
♦
Quality mode is initially turned off.
1
Press once and twice.
2
Press once and twice.
3
Press once.
QUALITY MODE
Display:
PRINT SET-UP
1=ON, 2=OFF
all.book Page 21 Tuesday, June 1, 2004 4:24 PM