Saba 31-5023 - Manual (Page 29)

29
Other functions
Listening to an external source
You can listen to other audio component(s) connected to
this system through your new speaker system.
To operate the audio component which is connected to
this system, press the SOURCE button repeatedly until
“AUX” appears on the front panel display.
Adjust the volume level by pressing the VOLUME + or
VOLUME - buttons.
Note: This system has a built in Dolby Pro Logic decoder,
so you can enjoy the live sound in Dolby Surround with
all speaks operating.
Using the sleep timer
Use this function to program the system to turn off
automatically after a specified amount of time.
SLEEP
Press the SLEEP button repeatedly, to select the following
the time intervals in minutes: 10 Ц 20 Ц 30 Ц 40 Ц 50 Ц
60 Ц 70 Ц 80 Ц 90 Ц 100 Ц 110 Ц 120 Ц 00 (off).
x When you have selected the specified time, the
“SLEEP” indicator lights on the television screen and
front panel display.
x To reset the time, press the SLEEP button again to
make another selection.
x To check the remaining time before the system
turns off, press the SLEEP button. The remaining
time will be displayed on the television screen and
front panel for a few seconds.
x To cancel the sleep function, press the SLEEP
button until it reaches 00 (off).
SOURCE VOLUME +/-