Sennheiser BW 900 - Manual (Page 14)

Basic settings
14
Basic settings
Switching the headset on/off
In the office it is not necessary to switch off the headset. If you do not
want to use the headset:
f Simply place the headset in the headset cradle
º
and set the head-
set/handset switch
³
to the “up” position.
The headset is deactivated. Your office phone works as usual with the
handset.
To switch off the headset (e.g. when taken away from the base station):
f Press and hold down the headset multi switch
ቤ
for approx. 4 sec-
onds until the headset LED
ቧ
flashes red three times to indicate that
the headset is switched off.
Note:
All settings are saved when the headset is switched off.
To switch the headset on, either:
f Place the headset in the headset cradle
º
.
or:
f
Press and hold the headset hook button
ብ
for approx. 4 seconds until
the headset LED
ቧ
flashes blue three times to indicate that the head-
set is switched on. Then the headset LED
ቧ
flashes blue once every
5 seconds to indicate that the headset is in standby mode.
Switching the base station on/off
To switch the base station off:
f
Unplug the power supply.
³
º
ቧ
ቤ
ቧ
ብ